AR15 Dismantle Guide 1.0
Free Version
Publisher Description
This app will tell you how to Dismantle your AR15 and put it back together.Includes- Turn the selector to 'SAFE'. If the weapon is not cocked, the lever cannot be turned to safe. If there is a magazine in the rifle, remove it. Lock the bolt open by pulling the charging handle rearward, pressing on the bottom of the bolt catch, and allowing the bolt to move forward until it engages the bolt catch. Return your charging handle to the forward position.Look in the receiver and chamber to ensure these areas contain no ammunition. With the selector on safe, allow the bolt to go forward by pressing the upper portion of the bolt catch.DISASSEMBLE YOUR RIFLERemove the sling.Remove the handguards. Push the takedown pin as far as it will go.Push the receiver pivot pin. Separate the upper and lower receivers.Pull back the charging handle and remove the bolt carrier and bolt. Remove the charging handle.Remove the firing pin retaining pin. Do not open or bend the split end of retaining pin. Put the bolt assembly in the locked position by pushing in the bolt assembly.Remove the firing pin by letting it drop out of the rear of the bolt carrier into your hand. Remove the bolt cam pin by turning it one-quarter turn and lifting it out,Pull the bolt assembly from the bolt carrier. Remove the extractor pin by using the firing pin to push it out. Do not damage the tip of the firing pin.Lift out the extractor and spring. Do not separate the spring from the extractor. Press in the buffer, depress the retainer, and release the buffer.Remove the buffer and action spring. Separate the buffer from the spring. CLEAN, AND LUBRICATE YOUR RIFLEClean the barrel from the receiver end, going through the flash suppressor, and do not reverse direction while in the bore.Clean the barrel locking lugs and the gas tube in the upper receiver. Use a worn bore brush clean outside surface of protruding gas tube. Clean the buffer and inside lower receiver extension, making sure to clean the drain hole with a pipe cleaner.Brush dirt and powder from the trigger mechanism and lower receiver. Clean the bolt carrier group.Clean the outer and inner surfaces of the bolt carrier. Clean the carrier key. Clean the firing pin recess and firing pin. Clean the firing pin hole with a pipe cleaner. Clean the carbon deposits and dirt from the locking lugs. Clean the areas behind the bolt ring and under the lip of the extractor.INSPECT YOUR RIFLE BEFORE ASSEMBLY.BOLT - Check for cracks or fractures especially in the cam pin hole area; bolts that contain pits extending into the firing pin hole need replacing.FIRING PIN - Bent, cracked or blunted end.
About AR15 Dismantle Guide
AR15 Dismantle Guide is a free app for Android published in the Other list of apps, part of Education.
The company that develops AR15 Dismantle Guide is Wavecrest Way. The latest version released by its developer is 1.0. This app was rated by 1 users of our site and has an average rating of 3.0.
To install AR15 Dismantle Guide on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2013-06-09 and was downloaded 5 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the AR15 Dismantle Guide as malware as malware if the download link to com.andromo.dev193476.app214096 is broken.
How to install AR15 Dismantle Guide on your Android device:
- Click on the Continue To App button on our website. This will redirect you to Google Play.
- Once the AR15 Dismantle Guide is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
- A pop-up window with the permissions required by AR15 Dismantle Guide will be shown. Click on Accept to continue the process.
- AR15 Dismantle Guide will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.
